VELOSIT® SC 240

Rapid Screed Cement

VELOSIT SC 240 is a cementitious binder for on-site screed mixes. It is mixed with sand and aggregates creating a rapid hardening overlayment ready to receive flooring systems within 24 hours. VELOSIT SC 240 may also be used as a binder for special concrete mixes and mortar formulations.

Typical applications:

  • Interior and exterior use
  • Bonded screeds 
  • De-coupled screeds on insulation or membranes
  • On-site concrete mixes

Properties:

  • Minimal shrinkage/expansion under dry resp. wet curing conditions minimizing the risk of micro-cracking
  • Excellent workability 
  • Fiber reinforced
  • Ready for covering with ceramic tiles after 4 hours, for moisture sensitive floor coverings after 16 hours.
  • 30 – 40 min. working time and 12 MPa (1740 psi) compressive strength after 4 hours*
  • Final strength of more than 50 MPa (7250 psi) after 28 days*
  • Open to foot traffic after 3 hours
  • Very good adhesion to properly prepared concrete
  • Excellent water resistance, no strength loss under water
  • High tensile strength allowing thin applications on de-coupled screed applications

Downloads

Here you can find detailed information about the selected VELOSIT product.


Technical Data Sheet

Associations & Memberships: