VELOSIT® TA 702

Thin & Medium Bed Tile Adhesive C2TE

VELOSIT TA 702 is a cementitious tile adhesive for a wide variety of tiles and natural stones on typical construction substrates like dry wall, screeds, concrete and masonry. 

Typical applications:

  • On cementitious, magnesite and gypsum-based floor screeds
  • On gypsum board walls, plaster, concrete and masonry
  • In swimming pools (over waterproofing layer)
  • In wet rooms, showers and kitchens
  • Interior and exterior applications

Properties:

  • Surpasses the requirements of EN 12004, Class C2TE
  • Mortar bed thickness between 2 and 12 mm (1/12“ to 1/2“)
  • 30 min. open time and 0.5 MPa (73 psi) adhesive strength after 6 hours
  • Open to foot traffic after 6 hours
  • Very good adhesion to most construction substrates

Downloads

Here you can find detailed information about the selected VELOSIT product.


Technical Data Sheet

Associations & Memberships: