VELOSIT® TA 703

Light Weight Thin & Medium Bed Tile Adhesive C2FE S1

VELOSIT TA 703 is a rapid hardening and light weight cementitious tile adhesive for a wide variety of tiles and natural stones on typical construction substrates like dry wall, screeds, concrete and masonry. 

Typical applications:

  • Especially suitable for large format tiles and natural stones
  • On cementitious, magnesite and gypsum-based floor screeds
  • On gypsum board walls, plaster, concrete and masonry
  • In swimming pools (over waterproofing layer)
  • In wet rooms, showers and kitchens
  • Interior and exterior applications

Properties:

  • Dust reduced
  • Shrinkage compensated – may be used as a repair mortar
  • Good initial tack and high sag resistance
  • Surpasses the requirements of EN 12004, Class C2FE
  • Variable water addition allows floor and wall application
  • Flexibility Class S1 acc. to EN 12002
  • Mortar bed thickness between 2 and 12 mm (1/12“ to 1/2“)
  • 30 min. open time and 0.5 MPa (73 psi) adhesive strength after 6 hours
  • Open to foot traffic after 3 hours

Downloads

Here you can find detailed information about the selected VELOSIT product.


Technical Data Sheet

Associations & Memberships: